Sustainable Design 
Sustainable Design encompasses the environmental performance of building elements and strategies, including energy use.
| Title |
Date |
Author |
|---|---|---|
| Keeping Energy Confined and Making Information Flow: The Smart Building of Tomorrow | Apr 13, 2015 | Christian Hoepfner, PhD, Director, Fraunhofer Center for Sustainable Energy Systems |
| Early Phase Performance Modeling to Right-Size Building Enclosure | Apr 13, 2015 | Jillian Burgess, RA. The Facade Group, Philadelphia, PA |
| Potential Energy Savings with Exterior Shades in Large Offce Buildings and the Impace of Discomfort Glare | Apr 13, 2015 | Sabine Hoffmann, Lawrence Berkeley National Laboratory, Eleanor Lee, Lawrence Berkeley National Laboratory |
| Thermal Performance and Energy Savings Potential of Attic Radiant Barrier Systems | Apr 13, 2015 | Som Shrestha, PhD, BEMP, ORNL, Andre Desjarlais, ORNL |
| Restoring Airtightness and Weather-Resistance to Window and Curtain Wall Systems | Apr 13, 2015 | Ed Retzbach, CSI, CDT, LEED AP BD+C |
| High-Performance Building Envelopes: Design Methods for Energy Efficient Facades | Apr 13, 2015 | Ajla Aksamija, PhD, LEED AP BD+C, CDT,Assistant Professor, University of Massachusetts, Amherst, MA |
| Double Wall Framing Technique – An Example of High Performance, Sustainable Building Envelope Technology | Apr 13, 2015 | Jan Kosny, Fraunhofer CSE – Cambridge MA, USA, Andi Asiz, Prince Mohammad Bin Fahd University, Kingdom of Saudi Arabia, Kaushik Biswas, Oak Ridge National Laboratory, Oak Ridge, TN, USA, Nitin Shukla, Fraunhofer CSE – Cambridge MA, USA |
| Weathered OSB Air and Water Leakage Testing | Apr 13, 2015 | Paul Grahovac, PROSOCO |
| State of the Art in Evaluation Durability of Exterior Plasters | Apr 13, 2015 | Dariusz Gawin,Department of Building Physics & Building Materials, Lodz University of Technology, Po, Marcin Koniorczyk, Department of Building Physics & Building Materials, Lodz University of Technolog, Piotr Konca, Department of Building Physics & Building Materials, Lodz University of Technology, Pol |
| Quantifying Comfort to Assist in the Window Selection Process | Apr 13, 2015 | Kerry Haglund, LEED AP BD +C, Executive Director, Efficient Windows Collaborative, Wyoming, MN, Jim Larsen, Director, Technology Marketing, Cardinal Glass Industries, Eden Prairie, MN |
| Thermal Resistance of Enclosed Reflective Airspaces in Building Applications | Apr 13, 2015 | Hamed H. Saber |
| Field Test Data from Retrofit of a Small Residential House Using EISF Technology | Apr 13, 2015 | John Edgar, STO Corporation, Ali Fallahi, Fraunhofer CSE, Alliston Watts, Fraunhofer CSE, Jan Kosny, Fraunhofer CSE, Linda Jeng, Dow Chemical |
| Thermal and Energy Performance of Autoclaved Aerated Concrete (aac) | Apr 13, 2015 | Nitin Shukla, Fraunhofer, Diane Elliott, Franhoufer, Bryan Urban, Fraunhofer, Ali Fallahi, Fraunhofer, Jan Kosny, Fraunhofer |
| Dynamic Façades: Solving the High Performance Building Challenge without Design Compromise | Apr 13, 2015 | Helen E Sanders, Vice President, Technical Business Development, SAGE Electrochromics, Inc., Fariba, Louis Podbelski, Vice President, Architectural Solutions, SAGE Electrochromics, Inc., Faribault, MN |
| Measuring Field Performance of Aerogel Insulation in a Hot, Dry Climate | Apr 13, 2015 | Bryan Urban, Fraunhofer Center for Sustainable Energy Systems, USA, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Anthony D. Fontanini, Iowa State University, USA , Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA |
| Performance Testing for QA and Commissioning | Apr 13, 2015 | John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
| History and Future of Fenestration: Where Have We Been? Where are We Heading? | Apr 13, 2015 | Stephen Selkowitz, Group Leader, Windows and Envelope Materials, LBNL |
| The Effects of #4 Surface Low-E Coatings on Fenestration Condensation Resistance | Apr 13, 2015 | Tracy G. Rogers, Quanex Building Products, Inc |
| Moisture Risk in Spray Polyurethane Foam Unvented Attics Due to Air Leakage Paths | Apr 13, 2015 | Duncan Prahl, RA, IBACOS, Pittsburgh, PA, Matthew Shaffer,PE, IBACOS, Pittsburgh, PA |
| Performance Testing for Quality Assurance and Commissioning | Apr 13, 2015 | Fiona Aldous, principal, WJE |
| A Detailed Study of Sunshades and their Effects on Performance | Apr 13, 2015 | Joe Fong, RA, NCARB, LEED AP (BD+C) Walter P. Moore |
| Pressure Differences and Airtightness in Tall Buildings – Theory & Reality | Apr 13, 2015 | Lorne Ricketts, MASc, EIT., RDH Building Engineering Ltd., Vancouver, BC, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
| Detailed Monitoring and Energy Model Development of an Existing Multi-Unit Residential Building in Toronto, Canada | Apr 13, 2015 | Marianne F. Touchie, Toronto Atmospheric Fund and University of Toronto, Toronto, ON, Kim D. Pressnail, University of Toronto, Toronto, ON |
| Building Enclosure Commissioning Education | Apr 13, 2015 | Wagdy Anis, FAIA, LEED AP, Anis Building Enclosure Consulting |
| Energy Efficient Retrofit of a High-Rise Multifamily Building | Apr 13, 2015 | Brittany Hanam, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, Lorne Ricketts, MASc, EIT, RDH Building Engineering Ltd., Vancouver, BC, Andrew Pape-Salmon, P.Eng., MRM, RDH Building Engineering Ltd., Victoria, BC |