Evaluation of the Thermal Performance of Innovative Pre-Fabricated Wall Systems through Field Testing |
Apr 02, 2012 |
Hua Ge (Ryerson University), Fitssum Tariku (British Columbia Institute of Technology) |
A Methodology for Developing Sustainable, High Performance Building Envelopes |
Apr 02, 2012 |
Grahame Maisey, PE (Building Services Consultants) |
The Emerging Role of Electronically Tintable Glass for Energy Codes and Standards |
Apr 02, 2012 |
Brandon TInianov, PhD |
Solar Reflectivity Studies Lotte World Tower – Case Study |
Apr 02, 2012 |
Charles D. Clift, PE (Curtain Wall Design and Consulting), Vicente Montes-Amoros, PE (Curtain Wall Design and Consulting) |
Electronically Tintable Glass as an Architectural Enabler |
Apr 02, 2012 |
Helen Sanders, PhD (SAGE Electrochromics, Inc.), Louis Podbelski, AIA (SAGE Electrochromics, Inc.) |
High Performance Curtain Wall Using Vacuum Insulated Panel (VIP) Spandrels |
Apr 02, 2012 |
Lawrence D. Carbary (Dow Corning Corporation), Andrew Dunlap, AIA (SmithGroup), Thomas F. O’Connor, FAIA (SmithGroup) |
Exploring the Building Energy Impacts of Green Roof Design Decisions - A Modeling Study of Buildings in Four Distinct Climates |
Apr 02, 2012 |
David J. Sailor (Portland State University), Timothy B. Elley (PAE Consulting Engineers), Max Gibson (Portland State University) |
Aerogel for Thermal Insulation of Interior Wall Retrofits in Cold Climates |
Apr 02, 2012 |
Nitin C. Shukla (Fraunhofer Center for Sustainable Energy Systems), Ali Fallahi (Fraunhofer Center for Sustainable Energy Systems), Jan Kosny (Fraunhofer Center for Sustainable Energy Systems), Steve Harasim (Aspen Aerogels Inc.), Chris Blair (Aspen Aerogels Inc.) |
Very High Performance Glazing In Traditional Framing |
Apr 02, 2012 |
Christopher J. Barry (Pilkington NA Inc.) |
Learning from Exterior Wall Problems |
Apr 02, 2012 |
Joseph P. Solinski (Stone & Glazing Consulting) |
Towards Airtightness – The Contractor’s Role in Designing and Constructing the Air Barrier System |
Apr 02, 2012 |
Michael P. Steffen, AIA (Walsh Construction Co.) |
Innovative High Performance Thermal Building Insulation Materials - Todays State-of-the-Art and Beyond Tomorrow |
Apr 02, 2012 |
Bjørn Petter Jelle (SINTEF Department of Matierials and Structure), Arild Gustavsen (Norwegian University of Science and Technology), Ruben Baetens (Catholic University of Leuven) |
Performance-Risk Analysis For the Design of High-Performance Affordable Homes |
Apr 02, 2012 |
Rodrigo Mora (British Columbia Institute of Technology), Fitsum Tariku (British Columbia Institute of Technology), Girma Bitsuamlak (Florida International University) |
Net Zero Energy Housing - Lessons Learned |
Apr 02, 2012 |
Gary Proskiw (Proskiw Engineering Ltd.), Alex Ferguson (Natural Resources Canada) |
Energy Performance Analysis of Building Envelopes Utilizing Blown Fiber Insulation with Microencapsulated Phase Change Material (PCM) |
Apr 02, 2012 |
E. Kossecka (Institute of Fundamental Technological Research of the Polish Academy of Sciences), J. Kośny (Fraunhofer Center for Sustainable Energy Systems), D. W. Yarbrough (R&D Services) |
Masonry Wall Interior Insulation Retrofit Embedded Beam Simulations |
Apr 02, 2012 |
Kohta Ueno (Building Science Corporation) |
Eliminating the Potential for Air and Moisture Infiltration in Stucco Facades at the Window-Wall Interface |
Apr 02, 2012 |
Peter Poirier (Tremco Building Envelope Solutions), Bill Hooper (Kawneer Company, Inc.) |
Thermal Insulation Systems of the Future |
Apr 02, 2012 |
Mark Bomberg (University of Toronto), Marcin Pazera (CENTRIA), Robert Aird (Robert Aird Inc.) |
Challenges and Failures in Green Building Design Using Under-floor Air Distribution |
Apr 02, 2012 |
Ken A. Urbanek (MKK Consulting Engineers, Inc.) |
The Concept of Linear and Point Transmittance and its Value in Dealing with Thermal Bridges in Building Enclosures |
Apr 02, 2012 |
Neil Norris (Morrison Hershfield), Mark Lawton (Morrison Hershfield), Patrick Roppel (Morrison Hershfield) |
The Role of the Building Façade – Curtain Walls |
Apr 02, 2012 |
Dudley McFarquhar, PhD, PE (McFarquhar Group Inc.) |
Informed Mechanical Design Through Tested Air Leakage Rates |
Apr 02, 2012 |
Jeff Speert, AIA (JRS Engineering Corp.), Cory Legge, AScT (JRS Engineering Ltd.) |
Towards a New Hospital Architecture |
Jan 01, 2012 |
Angela Burke, MA Art in Architecture |
Contexts Speaking: the Earthen Architecture of Two Villages |
Dec 01, 2011 |
Kate Wingert-Playdon (Temple University), Dennis G. Playdon (Temple University) |
Evidence-based Research for Architectural Design: Residential Site Plans and Older Adults Walking |
Dec 01, 2011 |
Zhe Wang, Ph.D., RA, LEED AP (Cannon Design), Mike Pukszta, AIA (Cannon Design), Mardelle Shepley, D. Arch, AIA, LEED AP (Texas A&M University) |