Case Study: Passive House Construction in Kansas City |
Apr 13, 2015 |
David Hawkins, Prairie Design build, David Schleicher, Prairie Design Build |
Low-Cost Bio-Based Phase Change Materials as an Energy Storage Medium in Building Envelopes |
Apr 13, 2015 |
Kaushik Biswas, Energy and Transportation Science Division, Oak Ridge National Laboratory, Oak Ridg, Nitin Shukla, Fraunhofer Center for Sustainable Energy Systems, USA, Jan Kosny, Fraunhofer Center for Sustainable Energy Systems, USA, Ramin Abhari, Renewable Energy Group Synthetic Fuels, LLC (formerly Syntroleum), Tulsa, OK, USA |
Performance Testing for QA and Commissioning |
Apr 13, 2015 |
John Straube, PE, faculty of engineering, University of Waterloo; principal, BSC Inc. |
Keeping Energy Confined and Making Information Flow: The Smart Building of Tomorrow |
Apr 13, 2015 |
Christian Hoepfner, PhD, Director, Fraunhofer Center for Sustainable Energy Systems |
The Bullitt Center Experience: The Light Dynamic -- Measured Performance of Lighting and Daylight |
Apr 13, 2015 |
Christopher Meek, University of Washington, Seattle, Michael Gilbride, University of Washington, Seattle, Heli Ojaama, University of Washington, Seattle, Weston Norwood, University of Washington, Seattle |
North American Way For Passive House-Based Near Zero Energy Buildings |
Apr 13, 2015 |
Katrin Klingenberg, Passive Solar House Institute-US |
Thermal and Hygrothermal Performance of Ventilated Attics With and Without Breathable Underlayments |
Apr 13, 2015 |
Sudhir Railkar, Ph.D. GAF, Adem Chich, GAF, Ming Shiaio, Ph.D., GAF, Andre Desjarlais, ORNL, William Miller, Ph.D. , ORNL |
Performance Testing for Quality Assurance and Commissioning |
Apr 13, 2015 |
Fiona Aldous, principal, WJE |
Restoring Airtightness and Weather-Resistance to Window and Curtain Wall Systems |
Apr 13, 2015 |
Ed Retzbach, CSI, CDT, LEED AP BD+C |
The Bullitt Center Experience: Building Enclosure Design in an Integrated High Performance Building |
Apr 13, 2015 |
Jim Hanford, AIA, LEED AP BD+C. The Miller Hull Partnership, Seattle, WA |
Production Homebuilder + Passive House: Lessons Learned |
Apr 13, 2015 |
Anastasia Herk, IBACOS, Pittsburgh, PA, Duncan Prahl, IBACOS, Pittsburgh, PA |
The Role of High-Complexity Low-Resolution (HCLR) Performance Modeling in the Development of Dynamic Building Envelopes |
Apr 13, 2015 |
TIm Frank, Assistant Professor, Department of Architecture, SPSU , Chip Clark, Research Assistant Professor, School of Architecture + Design, Virginia Tech |
Building Enclosure Commissioning Education |
Apr 13, 2015 |
Wagdy Anis, FAIA, LEED AP, Anis Building Enclosure Consulting |
State of the Art in Evaluation Durability of Exterior Plasters |
Apr 13, 2015 |
Dariusz Gawin,Department of Building Physics & Building Materials, Lodz University of Technology, Po, Marcin Koniorczyk, Department of Building Physics & Building Materials, Lodz University of Technolog, Piotr Konca, Department of Building Physics & Building Materials, Lodz University of Technology, Pol |
Early Phase Performance Modeling to Right-Size Building Enclosure |
Apr 13, 2015 |
Jillian Burgess, RA. The Facade Group, Philadelphia, PA |
Challenges and Opportunities in Deep Envelope Retrofitting |
Apr 13, 2015 |
Paul Bertram, FCSI, CDT, Director: Environment, Sustainability, Government Affairs Kingspan Insul |
Risk of Condensation and Mold Growth in Wood-Frame Wall Systems with Different Exterior Insulations |
Apr 13, 2015 |
Hamed H. Saber, Construction Portfolio, National Research Council of Canada, Wahid Maref, Construction Portfolio, National Research Council of Canada |
Five Not So Easy Pieces: Designing and Constructing the Passive House Enclosure |
Apr 13, 2015 |
Mike Steffen, Walsh Construction Co. |
Thermal and Energy Performance of Autoclaved Aerated Concrete (aac) |
Apr 13, 2015 |
Nitin Shukla, Fraunhofer, Diane Elliott, Franhoufer, Bryan Urban, Fraunhofer, Ali Fallahi, Fraunhofer, Jan Kosny, Fraunhofer |
High Performance Detailing |
Apr 13, 2015 |
Paul E. Totten, PE, LEED AP, Vice President, WSP, Washington, DC, Michael J. Heule, Principal, Helix Architecture + Design, Kansas City, |
Field Thermal Performance of Radiant Barriers and Interior Radiation Control Coatings for Attic Retrofits |
Apr 13, 2015 |
Ali Fallahi, Ph.D., R&D staff, Building Science Engineer, Fraunhofer CSE, Boston, MA, David Yarbrough, Ph.D., P.E., President, R&D Services, Cookeville, TN, Jan Kośny, Ph.D., Building Enclosure Program Lead, Fraunhofer CSE, Boston, MA |
Competing Performance Criteria in Renovation and Repurposing of Existing Building Exterior Enclosure Systems |
Apr 13, 2015 |
Paul G. Johnson, FAIA, NCARB SmithGroupJJR Inc., Building Technology Studio Leader |
Airflow in Mid to High-rise Multi-Unit Residential Buildings |
Apr 13, 2015 |
Lorne Ricketts, MASC, RDH Building Engineering LTD., Vancouver, Graham Finch, MASc, P.Eng., RDH Building Engineering Ltd., Vancouver, BC, John Straube, PhD, P.Eng., University of Waterloo, Waterloo, ON |
High-Performance Building Envelopes: Design Methods for Energy Efficient Facades |
Apr 13, 2015 |
Ajla Aksamija, PhD, LEED AP BD+C, CDT,Assistant Professor, University of Massachusetts, Amherst, MA |
Experimental Synthesis of Hollow Silica Nanospheres for Application as Superinsulation in the Buildings of Tomorrow |
Apr 13, 2015 |
Bjørn Petter Jelle, SINTEF Building & Infrastructure, Department of Materials and Structures, Norway, Tao Gao, Norwegian University of Science and Technology (NTNU), Department of Architectural Design, Linn Ingunn Christie Sandberg, Norwegian University of Science and Technology (NTNU), Bente Gilbu Tilset, SINTEF Materials and Chemistry, Materials and Nanotechnology Sector, Mathieu Grandcolas, SINTEF Materials and Chemistry, Materials and Nanotechnology Sector, Arild Gustavsen, Norwegian University of Science and Technology (NTNU), Department of Architectural |